To Next PageTo Next Page
Need help?Do you have a question about the Rocal RCr and is the answer not in the manual?
Details on the integrated firebox components, including vermiculite plates and ash pan.
Specifies the need for adequate bearing capacity and potential balancing panels.
Requirements for smoke connectors, outlets, and professional certification.
Guidance on using insulation panels for apparatus and fireplace room.
Mandatory clearances for internal and external fireplace areas.
Instructions for fireplace room ventilation and air flow management.
Ensuring sufficient outside air intake and compensating for other ventilation.
Requirements for non-flammable materials and clearance from apparatus.
Procedures for adjusting door closing, hinges, and frame.
Information on vermiculite plates, baffle plate, and side pieces.
Recommendations for cleaning the apparatus, smoke chamber, and smokestack.
Guidelines for initial operation and respecting maximum load limits.
Adjusting settings for correct performance based on technical data.
Adjusting the air slider for lighting and controlling fire intensity.
Fine-tuning combustion levels for optimal performance.
Reinforces clearances for flammable items and hot air outlets.
Information on on/off fire operation and authorized fuels.
Advisories on maximum load, log size, and handling internal parts.
Procedure for safely emptying the ash pan.
Recommendation for annual professional cleaning.
Details on heat-resistant paint and touch-up procedures.
Safety measures, clearances, and emergency actions.
Troubleshooting operation under adverse weather conditions.
Requirement for manufacturer authorization for any modifications.
Troubleshooting causes and solutions for smoke issues.
Diagnosing and resolving glass discoloration or dirt.
Identifying reasons for low heat output and solutions.
Addressing smoke escaping from the front door.
Troubleshooting and managing cracks in vermiculite components.
Listing of electrical components, including fans and thermostat.
Schematic representations for 2-fan and 4-fan systems.
Explanation of how the vent set jets heated air.
Description of the three positions for the ventilation switch (C-25).
Verifying turbine operation and cleaning grilles.
Warning and procedure for replacing damaged feeding wires.
First step to safely remove electrical components.
Steps to access and remove the appliance fans.
Guidance on finding thermostat, resistance, and wiring.
Step-by-step instructions for detaching the door.
Instructions for removing the door handle and stop.
Steps to detach glass side and upper mounting supports.
Procedure for removing door hinges and side frame parts.
Location and importance of the CE Marking label for technical data.
Note on the N° OF for ordering replacement parts.
Reference to UNE-EN standards for device testing.
Requirement for expert handling of installation and spare parts.
Conditions under which the warranty is valid or void.
General
