3.
30 31
must be cleaned and disinfected each time (see Sec-
tion 5). Please read the detailed description in Section
3.3 if you are performing measurements on several per-
sons.
Users in the office and laboratory sector should note
that samples containing human material must be
handled as potentially infectious material. Please
observe the appropriate regulations and guidelines.
Wash and dry your hands thoroughly.
Prepare the lancing device.
Switch on the Accutrend
®
GC.
When the function test is complete GLUC or CHOL
appears – or GLUC and CHOL alternately if the meter
has been coded for both.
The corresponding code number, the time and the date
appear below. The word CODE flashes and the
Accutrend
®
GC is now ready for the measurement of
the coded parameters.
Take a test strip out of the test strip container. Close
the container immediately otherwise the desiccant in
the stopper will be exhausted and the test strips will
become unusable.
With flap
●
D closed, insert the strip into the slot
●
F in
the direction of the arrow with the square yellow test
area facing upwards until the strip locks into place and
the inscription GLU or CHOL on the test strip is no
longer visible.
To Next Page
Loading...