4.
48 49
4.2 Retrieving results from memory
Switch on the meter and wait until the function test is
complete. As soon as CODE starts flashing in the
display
●
A , values can be retrieved from the memory.
Select the relevant directory by pressing
MEM
for glucose values or
MEM
for cholesterol values.
If no results have been stored, the display will show
00
. If
01
is displayed this means that there is at least
1 value in the memory.
Release the MEM button. The last result stored will
appear on the display.
e.g.
e.g.
To Next Page
Loading...