Roche Diagnostics
cobas c 513 analyzer · Software Version 02-05 · Safety Manual · 6.0
33Caution messages
Analyzer parts Contact with analyzer parts may result in personal injury.
r Keep all covers and doors closed and in place while
the system is operating. An interlock system prevents
operation of moving parts when the covers are open.
Give the interlock override key to a trained supervisor.
Ensure that only trained supervisors use interlock
override mode.
r Always ensure that the system is powered off, in sleep
mode, or in standby mode, before you work with an
opened cover, for example, for cleaning or
maintenance.
r Keep away from moving parts during operation.
r During operation and maintenance, carefully follow
the instructions.
r Do not touch any parts of the analyzer except those
parts specified.
r Do not insert your hands into the rack rotor.
Reagents and other working solutions
Skin inflammation or injury Direct contact with reagents, detergents, cleaning
solutions, or other working solutions may cause skin
irritation, inflammation, or burns.
r When you handle reagents, exercise the precautions
required for handling laboratory reagents.
r Wear appropriate personal protective equipment.
r Observe the instructions given in the Instructions for
Use for the test.
r Observe the information given in Material Safety Data
Sheets, available for Roche Diagnostics reagents and
cleaning solutions.
r If reagents, detergents, or other cleaning solutions
come into contact with your skin, wash the affected
area immediately with soap and water and apply
disinfectant.
Consult a physician.
Fire and burns Alcohol is a flammable substance.
r Keep all sources of ignition, such as sparks, flames, or
heat, away from the analyzer when you perform
maintenance or checks that involve alcohol.
r When you use alcohol on or around the analyzer, use
no more than 20 mL at a time.
To Next Page
Loading...
Need help?
General
