Roche Diagnostics
cobas c 513 analyzer · Software Version 02-05 · Safety Manual · 6.0
39Safety labels on the system
Safety labels on the system
In this section
List of safety labels on the analyzer (39)
Location of safety labels on the analyzer (41)
List of safety labels on the analyzer
Warning labels are placed on the analyzer to draw your
attention to areas of potential hazard.
Listed below are labels and their definitions according to
the location on the analyzer.
The safety labels on the analyzer comply with the
following standards: EN980 and EN15223-1.
In addition to the safety labels on the analyzer, there are
safety notes in the corresponding parts of the user
documentation.
q Only Roche service personnel are to replace
damaged labels. For replacement labels, contact your
Roche service representative.
General warning
Potential hazards located near this label may lead to
death or serious injury.
Refer to the user documentation for instructions on safe
operation.
Biohazard
Potentially biohazardous materials are used near this
label.
Observe relevant good laboratory practices on safe
usage.
Corrosive materials
There is a danger of contact with corrosive or caustic
material.
Wear appropriate personal protective eye protection and
gloves.
To Next Page
Loading...
