Roche Diagnostics
cobas c 513 analyzer · Software Version 02-05 · Safety Manual · 6.0
34 Caution messages
Contaminated samples Insoluble contaminants, bubbles, or films in samples may
cause clogging or pipetting volume shortage, leading to
incorrect results.
r Make sure that the samples contain no insoluble
contaminants, such as fibrin or dust.
Incorrect results due to incorrect handling of
reagents
Incorrect handling of reagents or other consumables may
lead to incorrect results.
r Do not use reagents that were exposed to heat or to
light for an extended time.
r Adhere to the storage conditions defined in the
Instructions for Use for the reagents, controls,
calibrators, and consumables.
r Do not use reagents or consumables that have been
dropped on the floor or compromised in any other
way.
r Do not manipulate supplies in any way not specified in
the user documentation or Instructions for Use.
External media
Incorrect use of external media Incorrect use of external media may cause loss of results
or system error.
r Use DVDs and USB flash storage devices of the
correct format.
r Only insert or remove a DVD or USB flash storage
device when the system is in standby mode.
r Before you remove a USB flash storage device, safely
remove the device from the system.
Fatigue due to long hours of operation
Fatigue due to long hours of operation Looking at the monitor over an extended time may lead to
eye strain or body fatigue.
r Take a break to relax, in accordance with your
laboratory's SOPs or local regulations.
To Next Page
Loading...
Need help?
General
