RocketFish RF-HTMT15 - STEP 5 - Install Wall Plate (Wood Studs); Wood Stud Installation Procedure

12
Need help? Call 1-800-620-2790 (U.S. and Canada)
STEP 5 - Option 1: Installing on a wood stud wall
1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder.
You’ll need
Notes:
• Drywall covering the wall must not exceed 5/8” (16 mm).
• Minimum wood stud size: Common 2 x 4 in. (51 x 102 mm). Nominal 1.5 x 3.5 in.
(38 x 89 mm)
Edge-to edge
stud finder
Lag bolt (U) (2)
7/32” wood
drill bit
1/2” socket
wrench
Template (D)
Wall plate (A)
Lag bolt washer
(T) (2)
Pencil
Level
Drill
Tape