RocketFish rf-tvmfm02 User Manual

RF-TVMFM02
TV Wall Mount
Assembly Guide
Safety information and specifications .................................2
Tools needed.................................................................................3
Parts..................................................................................................4
Assembly instructions................................................................6
For wood-stud or
solid concrete/concrete block
installation

RocketFish rf-tvmfm02 Specifications

Power

Operating voltage	3V (Battery: CR2025)
Standby current	1.2μA

Operating Environment

Operating temperature	14° ~ 122°F (-10° ~ 50°C)
Transmitting angle	30°
Maximum operating distance	32.8 ft. (10 m)

Frequency

Carrier frequency	38.1 KHZ

Physical Characteristics

Dimensions	2.6 × 1.2 × 0.3" (6.7 × 3.1 × .7 cm)
Weight	0.4 oz (12 g)
Wavelength	940 nm

Summary

Safety Information and Specifications

Tools Needed for Installation

Package Contents: Parts

Package Contents: Hardware

TV Wall Mount Assembly Instructions

Install TV Bracket to Television

Attach the TV bracket to the back of the TV using appropriate hardware for flat or obstructed surfaces.

Install Arm Assembly to Wall

Mount the arm assembly to the wall, choosing between wood stud or concrete wall installation methods.

Mount TV to Wall Mount

Secure the television onto the installed arm assembly using the provided cap screw and hex key.

Adjust TV Viewing Angle

Fine-tune the TV's tilt up to ± 6° using a hex key for optimal viewing comfort.

Adjust Swivel Tension

Modify the swivel tension of the arm assembly with a hex key for desired movement resistance.

Cable Management

Utilize cable ties to organize and secure TV cables along the arm assembly for a neat setup.

Adjust TV Tilt

Adjust the TV's forward or backward tilt by up to 10° using fingers or a hex key.