28
2 Either press the DEVICE buttons on the remote control or turn the
volume knob on the receiver where you want the volume to change.
Controlling the stream volume
To control the volume of all devices connected to the receivers connected to Input A or B
at the rear sender:
1 Select Source A or B or another source stream by pressing Next Source
on the remote control or the SOURCE button on the receiver.
2 Press the STREAM Volume buttons on the remote control.
TM
TM
RF-RBKIT_09-0473_MAN_ENG_V1.fm Page 28 Thursday, August 27, 2009 6:44 PM
To Next Page
Loading...
