23
RF-RBUSB
3 Play music from the audio device connected to your wireless
sender/receiver.
4 Adjust the volume on your Rocketboost wireless receiver.
Using your wireless sender/receiver as a receiver
Note: When using the wireless sender/receiver as a receiver, the Receive
mode indicator LED will light when you are receiving an audio source
from the Rocketboost network.
To use your wireless sender/receiver as a receiver:
1 Turn on the audio source connected to the Rocketboost wireless
sender. Make sure the volume of the audio source is turned up and
not muted, otherwise no audio will be sent over the Rocketboost
network.
2 Play music from the audio device connected to your Rocketboost
wireless sender.
If you have multiple audio sources in your Rocketboost network,
press the Source button on the Rocketboost wireless receiver to
hear the next audio source. Press the Source button again to cycle
through all available audio sources.
Controlling the device volume
When the wireless sender/receiver is used as a wireless receiver, the
output volume is adjusted at the amplifier or powered speakers
connected to the wireless receiver. The wireless sender/receiver remote
control device volume controls can be used with other Rocketboost
wireless devices that support volume (for example RF-RBWS02 wireless
outdoor speaker).
RF-RBUSB_11-0204_MAN_V1.fm Page 23 Monday, May 2, 2011 8:04 AM
To Next Page
Loading...
Need help?
General
