20
2 Match the polarity on the battery with a plus sign (+) on the battery
tray.
Replace the battery with a CR2025 or equivalent.
3 Slide the tray with the new battery into the battery compartment
until it clicks into place.
Warnings:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type of battery.
Notes:
Remove the battery from the remote control when it is not to be used for a long
period. Otherwise it might be damaged due to battery leakage.
Do not drop or jar the remote control.
Do not spill water or any liquid on the remote control.
Do not place the remote control on a wet object.
Do not place the remote control under direct sunlight or near sources of excessive
heat.
Using your wireless sender/receiver
Turning on your wireless sender/receiver
To turn the wireless sender/receiver on and off:
1 When initially connecting to an AC outlet, the device automatically
turns on. To turn off the device, press . The power indicator turns
off and the standby indicator turns red.
2 If the wireless sender/receiver is off, press to turn it on. The
power indicator lights.
RF-RBUSB_11-0204_MAN_V1.fm Page 20 Monday, May 2, 2011 8:04 AM
To Next Page
Loading...
