18
STEP 5 - Option 2: Attaching the mounting hardware to
TVs with irregular or obstructed backs
1 Place the spacers (N) and mount spacers (F) over the top two
screw holes on the back of the TV.
2 Place the spacers (N) and the TV bracket arms (B) over the
bottom two screw holes on the back of the TV. To make sure
the arms are not visible when on the wall, align the arms so
they reach the bottom or corners of the TV, but do not over
hang the edges.
3 Align your existing TV wall mount bracket with the screw
holes on the back of the TV.
4 Install screws (P, Q, R, S, or T) and washers (G, GG, H, or HH)
through the top two holes in the wall mount bracket.
The TV
brackets should be level on the back of the TV.
Do not tighten.
5 Install screws (P, Q, R, S, or T) and washers (G, GG, H, or HH)
through the bottom two holes in the wall mount bracket.
Continued on next page.
RF-SBM101_13-0263_MAN_V1_ENG.fm Page 18 Monday, May 6, 2013 10:53 AM
To Next Page
Loading...
Need help?
General
