RocketFish RF-TVMFM02V2 User Manual

7
Need help? Call 1-800-620-2790 (U.S. or Canada)
TV WALL MOUNT RF-TVMFM02V2/RF-TVMFM02V2-C
Step 3 - Install the vertical TV brackets - Option 1:
Installing for a TV with a flat back
1 Center the brackets vertically on the back of your TV, then align the holes on the
right vertical TV bracket (B) and left vertical TV bracket (C) with the screw holes
on the back of your TV. The brackets are marked “R” for the right bracket and “L”
for the left bracket. Make sure the brackets are level.
2 Place the M4/M5 washers (I) or M6/M8 washers (J) over the holes in the TV
brackets that align with the screw holes on the back of your TV, then insert the
M4 screws (G), M5 screws (L), M6 screws (N), or M8 screws (P or Q) through the
washers.
3 Tighten the screws until they are snug against the TV bracket. Do not over
tighten.
You’ll need
OR
OROR OR
OR
I (4)
J (4)
G (4)
L (4)
N (4)
Phillips screwdriver
or
or
or
Screws
or
P (4)
Washers
Level
TV brackets (B
and C)
Q (4)
or

RocketFish RF-TVMFM02V2 Specifications

General

Brand	RocketFish
Model	RF-TVMFM02V2
Category	TV Mount
Language	English