EasyManua.ls Logo

RocketFish RF-WHP01 - User Manual

RocketFish RF-WHP01
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Digital Wireless Stereo
Headphones
Casque d’écoute stéréo numérique
sans fil
Auriculares estéreo digitales
inalámbricos
RF-WHP01/02
User Guide Guide de l’utilisateur Guía del Usuario
08-1077 RF-WHP01-WHP02.book Page 1 Thursday, March 27, 2008 1:29 PM

Questions and Answers

  • A
    Amanda MartinJul 26, 2025
    What to do if my RocketFish Headphone has no sound?
    • F
      Frank MccormickJul 26, 2025
      If your RocketFish Headphones have no sound, try these steps: * First, check that the volume level on your headphones, A/V receiver, or amplifier isn't set too low. * Next, ensure that all cables are correctly and securely connected. * Finally, verify that the power indicators on both the headphones and the docking station are lit steadily. If they're blinking green or alternating between red and green, consult the troubleshooting steps for 'No Communication between the headphones and docking station'.
  • D
    David CarlsonAug 4, 2025
    Why does my RocketFish RF-WHP01 have sound interference?
    • J
      James OlsonAug 4, 2025
      Sound interference in your RocketFish Headphones can often be resolved by: * Moving the docking station slowly to find the best reception. * Reducing the distance between the headphones and the docking station, keeping in mind that the maximum distance is 98 feet for WHP02 or 65 feet for WHP01. * Checking for any nearby sources of radio frequency interference.
  • T
    tracy39Nov 13, 2025
    How to fix no communication between RocketFish RF-WHP01 Headphone and docking station?
    • J
      Jonathan AllenNov 13, 2025
      If your RocketFish Headphones aren't communicating with the docking station: 1. Ensure the AC adapter is properly connected to the docking station. 2. Verify that two working batteries are correctly installed in the headphone battery compartments. 3. Check if the batteries are exhausted. 4. For WHP02 models, the headphone and docking station power indicators should light up when the headphone switch is set to ON and AUX IN/MIC IN is selected on the docking station. For WHP01 models, the indicators should light up when the headphone switch is ON and the /| button on the docking station is pressed. 5. If the indicators are solid green, a connection is established. If they blink green on either unit, press and hold the CONNECT button on both the headphones and docking station for three ...

Summary

Safety Information

Product Features

Component Identification

Headphones Front and Side View

Identifies and describes front and side components of the headphones.

Docking Station Front View

Identifies and describes front components of the docking station.

Setting Up Your System

Connecting to A;V Receiver with External Amplifier

Guides connecting the system to an A/V receiver when an external amplifier is used.

Connecting to Amplifier

Connecting to A;V Receiver with Internal Amplifier

Connecting the Microphone (WHP02 Only)

Connecting the AC Adapter

Using Your System

Installing or Replacing Headphone Batteries

Details how to install or replace the AA rechargeable batteries in the headphones.

Installing Batteries in Headphones

Charging the Headphones

Establishing a Link

Listening to Headphones

Turning Off the System

Troubleshooting

Specifications

One-Year Limited Warranty

RocketFish RF-WHP01 Specifications

General IconGeneral
BrandRocketFish
ModelRF-WHP01
CategoryHeadphone
LanguageEnglish

Related product manuals