Need help?Do you have a question about the Rockford Fosgate 500.2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Minimum Impedance | 2 Ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 100 dB |
| Crossover Slope | 12 dB/octave |
| RMS Power (2 Ohms) | 250W x 2 |
| Bridged RMS Power (4 Ohms) | 500W x 1 |
| Power Output | 500 Watts |
| Total Power Output | 500 Watts |
| Dimensions | 10.5" x 2.25" |
| Input Sensitivity | 150 mV to 4 V |
| Bass Boost | 0 dB |
Lists all included items in the amplifier's accessory kit for installation.
Covers proprietary technologies like trans-nova, DIAMOND, MEHSA, TOPAZ, DSM.
Details Bass EQ, Balanced Line Inputs, NOMAD, and MOSFET devices.
Describes heatsink, end caps, and input/output connection points.
Explains Bass EQ, Phase, Crossover switches, and LED status indicators.
Outlines vehicle prep, safety rules, and required tools for installation.
Guides on optimal mounting, battery, and charging system checks.
Step-by-step instructions for connecting power, ground, REM, and speakers.
Explains passive crossovers, component values, and XCard customization.
Illustrates XCard settings for High-Pass, Low-Pass, and Bandpass filters.
Details Stereo, Stereo/Mono, Bridged, and EZ-Bridged operation setups.
Explains balanced inputs, BLT connection, and level setting for noise reduction.
Lists accessories like BLT, capacitors, and XCard crossover options.
Covers symptoms, diagnoses, and remedies for common amplifier problems.
Provides a systematic method for diagnosing audio system noise.
Explains power testing standards and lists product specs.
Details warranty coverage, exclusions, and service procedures.
Notes product origin and compliance information.
To Next Page