Need help?Do you have a question about the Rockford Fosgate Power T1000-1bdCP and is the answer not in the manual?
General| Number of Channels | 1 |
|---|---|
| Frequency Response | 20 Hz - 250 Hz |
| Damping Factor | > 200 |
| Rated Power (RMS @ 2 Ohms) | 1000 Watts |
| Remote Control | Yes |
| Total Harmonic Distortion (THD) | <1.0 % |
| Input Sensitivity | 200mV - 4V |
| Tone Controls | Bass Boost: 0 - 12dB @ 45Hz |
| Bass Boost | 0dB / +6dB / +12dB @ 45 Hz |
Key safety precautions and warnings for amplifier installation and use.
Overview of the amplifier's key components and functionalities.
Factors to consider before and during installation.
Recommended and prohibited locations for mounting the amplifier.
Information on power requirements and vehicle electrical system compatibility.
Detailed steps for connecting the amplifier's power, ground, and signal wires.
How to use the optional remote control for bass boost.
Explanation of the infrasonic filter and its application.
Details on the Punch EQ bass boost feature.
How to set the crossover point for optimal sound.
Procedure for setting the amplifier's input gain correctly.
Steps to verify correct wiring and power connections.
Diagnosing issues indicated by Protect or Thermal LEDs.
Steps to troubleshoot lack of audio output from the amplifier.
How to resolve popping sounds when turning the unit on/off.
Methods to eliminate engine noise interference in the audio system.
RMS power ratings and physical dimensions for amplifier models.
Fuse rating, signal-to-noise, impedance, and voltage requirements.
Crossover, Punch EQ, and Infrasonic Filter details.
Frequency response, damping factor, and distortion levels.
Amplifier protection circuits, input types, and noise rejection.
Duration of warranty coverage for different product types.
What is covered, who is covered, and what is not covered by the warranty.
Implied warranty limits and procedures for obtaining service.
Information regarding warranty requirements in the European Union.
To Next Page