Need help?Do you have a question about the Rockford Fosgate Punch 40I and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| RMS Power at 4 Ohms | 20W x 2 |
| Input Sensitivity | 200mV - 2V |
| Crossover Slope | 12dB/octave |
| Bridged Power Output | 80W x 1 |
| Frequency Response | 20Hz - 20kHz |
| THD at Rated Power | 0.05% |
| Signal to Noise Ratio | >90dB |
| Bass Boost | 0dB |
| Signal-to-Noise Ratio | >90dB |
Describes the key functional aspects and technologies of the Punch amplifiers.
Provides specific guidance for mounting the amplifier in a vehicle's trunk for optimal cooling.
Offers advice on mounting the amplifier in the passenger area, under seats or on the floor.
To Next Page