Need help?Do you have a question about the Rockford Fosgate Punch P300-2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Power Output (RMS) @ 4 Ohms | 75W x 2 |
| Power Output (RMS) Bridged @ 4 Ohms | 300W x 1 |
| Frequency Response | 20 Hz - 20 kHz |
| Dimensions | 9.5" x 9" x 2.5" |
| Total Harmonic Distortion (THD) | < 0.05% |
| Input Sensitivity | 150 mV to 4 V |
| Fuse Rating | 30A |
| Signal to Noise Ratio | > 100 dB |
| Crossover | Variable |
Important safety warnings and cautions regarding installation and operation of the amplifier.
Detailed instructions and precautions for connecting power, ground, and signal wires.
Procedure for setting the amplifier's input gain for optimal volume and signal-to-noise ratio.
Steps to verify power, fuse, ground, and voltage connections for basic operation.
Diagnosing issues indicated by the Protect or Thermal LEDs, often related to shorts or heat.
To Next Page
