Need help?Do you have a question about the Rockford Fosgate Punch 201S and is the answer not in the manual?
General| Brand | Rockford Fosgate |
|---|---|
| Model | Punch 201S |
| Category | Amplifier |
| Language | English |
Crucial safety advice regarding high sound pressure levels and hearing protection.
Important warnings and precautions for safe operation and installation of the equipment.
Lists all items included in the product packaging for user verification.
Describes the function of the LED that indicates when the unit is powered on.
Explains the remote terminal used for turning the amplifier on and off with a +12V DC signal.
Details the platinum-plated power and ground connectors that accept various wire gauges.
Highlights the heatsink design for efficient heat dissipation and improved cooling performance.
Describes the feature for correcting acoustical deficiencies by adjusting bass frequencies.
Details the built-in selectable crossover filters for HP, AP, or LP operation.
Explains the input gain control for matching output levels from different source units.
Describes the industry-standard RCA jacks for signal level input, resistant to corrosion.
Details the high-level inputs for source units without RCA outputs, using detachable connectors.
Describes the platinum-plated speaker terminals immune to corrosion for signal clarity.
Lists tools and initial steps for planning and preparing the amplifier installation.
Provides guidance on suitable locations for mounting the amplifier in the vehicle for optimal performance.
Advises on checking the vehicle's electrical system to handle the amplifier's increased power load.
Details the procedures and precautions for connecting power, ground, and signal wires.
Explains the use of passive crossover networks for directing specific frequency ranges to speakers.
Instructions for mounting and using the remote bass control for specific amplifier models.
Step-by-step guide for setting the amplifier's input gain to match the source unit's output.
Explains how to set the crossover frequency for High Pass, All Pass, and Low Pass operations.
Mentions accessories like capacitors and connecting links for amplifier setup.
To Next Page