Need help?Do you have a question about the Rockford Fosgate PUNCH 301M and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Frequency Response | 20 Hz - 250 Hz |
| THD at Rated Power | < 1% |
| Signal to Noise Ratio | > 100 dB |
| RMS Power at 4 Ohms | 300 Watts |
| Power Output (RMS) | 300W |
| Input Voltage | 14.4V |
| Input Sensitivity | 200mV - 4V |
| Low Pass Crossover | Adjustable 50 Hz - 250 Hz |
| Bass Boost | 0 - 18 dB |
Explains safety symbols (WARNING, CAUTION) and provides critical precautions.
Details key design elements of the amplifier, including heatsink, crossover, inputs, and terminals.
Lists necessary tools and discusses vehicle considerations for amplifier installation.
Provides guidance on suitable and unsuitable locations for mounting the amplifier.
Discusses the amplifier's load on the vehicle's electrical system and recommendations.
Step-by-step instructions and precautions for wiring the amplifier, including power, ground, and signal connections.
Instructions on how to properly set the amplifier's gain and adjust the crossover frequency.
Information on related accessories like capacitors and linking amplifiers.
Guides for diagnosing and resolving common issues like connection problems, no audio, turn-on pop, and engine noise.
Details warranty length, coverage, exclusions, and implied warranty limits.
Instructions on obtaining service, including RA#, and EU warranty information.
To Next Page