Initial Setup
Unpacking
Unpack the speaker carefully. We recommend that you save the box and packing materials in
case you wish to store the speaker. Before setting up the unit, verify that the following
accessories are present:
• 1 x USB power cable
• 1 x AUX input audio cable
• 2 x Microphone
Charging the SingCube
Unwind the USB power cable to its full length; connect one end to the DC input jack on the rear
of the speaker. Connect the other end to a USB power adapter or PC USB port. The
charge
indicator LED will light up red to indicate charging. Charge for at least 4 hours before first use.
The charge indicator LED will go out when the speaker is fully charged.
Operation
Switching the SingCube On/Off
Press the on/off switch at the rear of the speaker to switch on. A chime will be heard, and the
Bluetooth indicator will light up blue to indicate that the speaker is searching for an available
Bluetooth audio device. Press the on/off switch on the rear of the speaker to switch off.
Bluetooth Operation
The SingCube is a high-quality Bluetooth speaker. Music can be played through the SingCube
Speaker from a compatible Bluetooth device such as a mobile phone or tablet device.
To Next Page
Loading...
