Rockville RPA-5 User Manual

PROFESSIONAL STEREO POWER AMPLIFIER
OWNER’S MANUAL
RPA-5
/
RPA-9

Rockville RPA-5 Specifications

General

Channels	2
Frequency Response	20 Hz - 20 kHz
Impedance	4 Ohms
Cooling	Fan-cooled
Signal-to-Noise Ratio	100 dB
Damping Factor	>200
Input Connections	RCA
Output Connections	Binding Post
Power Supply	110V

Summary

Back Panel Features

Input and Link Out Connectors

Details XLR/1/4" TRS/TS combo inputs, RCA inputs, and 1/4" Link Out connectors.

Operation Mode Switches

Includes Stereo/Bridged switch and High Pass/Low Pass mode button.

Output Connectors

Provides SpeakON and Binding Post outputs for speakers.

Power Input

IEC AC power socket and AC fuse compartment.

Configurations

Connections Guide

Crossover and Troubleshooting

Troubleshooting: Unit Fails to Power Up

Steps to diagnose and resolve issues when the unit does not power on.

Troubleshooting: Unit Has No Sound

Specifications

Model Power Output

Detailed power output ratings for RPA-5 and RPA-9 at different impedances (Stereo 8/4 Ohm, Bridged 4 Ohm).

Performance Metrics

Provides frequency response, distortion, input impedance, and signal-to-noise ratio.

Physical and Electrical Requirements

Includes power requirements, weight, and physical dimensions for both models.

FCC Compliance Information

FCC Compliance Declaration

Interference Mitigation