Need help?Do you have a question about the Rockville RPA6000USB and is the answer not in the manual?
General| Peak Power | 6000 Watts |
|---|---|
| RMS Power | 3000 Watts |
| Channels | 2 |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 4 Ohms |
| Input Sensitivity | 0.775V |
| Outputs | Speakon, Binding Post |
| THD | < 0.1% |
| Damping Factor | > 200 |
| Cooling | Fan cooled |
| USB Input | Yes |
| SD Card Input | Yes |
| Bluetooth | Yes |
| Display | LCD |
| Output Connectors | Speakon, Binding Post |
| Inputs | XLR, RCA |
| Input Impedance | 10k Ohms |
| Amplifier Class | AB |
| Input Voltage | 110V - 120V / 220V - 240V |
| Input Connectors | XLR, RCA |
| Power Supply | 110V/220V Switchable |
Controls power and interfaces for USB, iPod/MP3, and microphones.
Buttons for AM/FM tuning, scanning, track selection, and playback.
Features the VFD display, input selection, menu access, mute, and dimmer.
Knobs for master volume, microphone volume, tone, echo, and subwoofer output.
Ports for connecting AM and FM antennas.
Inputs for pre-amp audio and outputs for pre-amp, sub woofer, and speakers.
Includes IEC power socket, fuse, voltage selector, and cooling fans.
Buttons for switching inputs, AM/FM, and Stereo/Mono modes.
Controls for USB playback, track skipping, and radio station tuning.
Buttons for master volume, mute, EQ settings, and repeat function.
Buttons for saving stations (Memory) and restoring factory settings (Reset).
To Next Page