Rockville RPR-4 User Manual

PROFESSIONAL STEREO POWER AMPLIFIER
OWNER’S MANUAL
RPA-4
/
RPA-8

Rockville RPR-4 Specifications

General

Channels	4
Impedance	4 Ohms
Frequency Response	20 Hz - 20 kHz
Dimensions	19" x 11" x 3.5"
THD	<0.05%
Damping Factor	> 200
Input Impedance	10k Ohms

Summary

Features

Front Panel RPA-4 / RPA-8 (Pictured RPA-4)

Details front panel controls and indicators like power switch, clip LEDs, signal LEDs, and gain adjustment knobs.

Back Panel RPA-4 / RPA-8 (pictured RPA-4)

Describes rear panel inputs, outputs, mode switch, fans, power socket, fuse, and voltage selector.

Configurations

Live Music Setup

Illustrates a typical live music setup with the amplifier, mixer, keyboard, microphones, and MP3 player.

Recording Studio Setup

Depicts a recording studio setup with the amplifier connected to various audio devices and amplifiers.

DJ Set-up

Shows a DJ set-up using the amplifier with turntables, mixer, and DJ controller.

Connections

Stereo Connection

Illustrates speaker connection in stereo mode and correct mode switch setting.

Bridged Connection

Demonstrates speaker connection in bridged mode and correct mode switch setting.

Crossover

Crossover Mode Explanation

Explains the crossover function and mode switch settings for full, low, and high pass modes.

Troubleshooting

Power and Sound Issues

Provides solutions for common issues like unit failing to power up or having no sound.

FCC Compliance

Compliance Information

Details FCC compliance statements, rules, and measures to correct interference.