The Mic In port is designed for balanced and unbalanced mic signals. When you use an
unbalanced ¼˝ TS plug, the line input automatically turns the ring into ground.
XLR/¼˝ Combo Mic In Jack
XLR
1/4˝
The Line In port accepts signals from a variety of sources such as keyboards, electronic
drums, mixers, etc. When you use an unbalanced ¼˝ TS plug, the line input automatically
turns the ring into ground. Please do not plug microphones into line input as it will have
poor sound quality. Use the Mic In port for microphones.
XLR/¼˝ Combo Line In Jack
XLR
1/4˝
LINE
To connect your iPod, iPhone, MP3 player, Android phone or any other Bluetooth capable
device follow the steps listed below. Diagrams on the next page.
1. Make sure the RPG BT V2’s power switch is in the ON position.
2. Turn-on your device’s Bluetooth mode and ensure that it is in “discoverable” mode.
3. Push the Mode button on your RPG BT V2 until you are in Bluetooth mode.
4. Once in Bluetooth mode, look for "ROCKVILLE" on the list of available devices and
select it.
5. If pairing is successful, you will see the words BT: Connected on the display screen.
6. If you have problems pairing your device please check the troubleshooting guide.
Bluetooth Pairing
1
2
To Next Page
Loading...
Need help?
General