Rockville RPG12BT V2 User Manual

4
FOL TWS FOL- FOL+
BT :DisConnected
TWS:DisCOnnected
3
FOL TWS FOL- FOL+
BT :Connected
TWS:DisCOnnected
5
Bluetooth Pairing (continued)
These RPG-BT V2 speakers feature a record function which allows you to record the signal
from any of the inputs to a USB ash drive or a an SD card.
1. Make sure you have a USB ash drive or an SD card with sufcient space. Plug the
storage device to the corresponding port.
2. When you are ready to start, press the record button on the MP3 module or on the
remote control.
3. Press the record button again when you are ready to stop. If using the remote control,
you can also use the STOP button.
4. To listen to your recordings, use the playback controls on the MP3 module.
Record Function

Rockville RPG12BT V2 Specifications

General

Brand	Rockville
Model	RPG12BT V2
Category	Speakers
Language	English