Rockwell Automation 1734-FPD User Manual

Installation Instructions
POINT I/O Field Potential Distributor
Modules
Catalog number 1734-FPD, Series B
Table of Contents
Topic Page
Important User Information 2
Environment and Enclosure 3
Preventing Electrostatic Discharge 3
North American Hazardous Location Approval 4
European Hazardous Location Approval 5
About the Module 6
Install the Module 7
Remove the Module 8
Replace the Module 8
Wire the Module 9
Specifications 12

Rockwell Automation 1734-FPD Specifications

General

Brand	Rockwell Automation
Model	1734-FPD
Category	Power distribution unit
Language	English

Summary

Important User Information

Safety Warnings and Symbols

Defines warning symbols like WARNING, ATTENTION, SHOCK HAZARD, BURN HAZARD, and IMPORTANT.

Environment and Enclosure

Preventing Electrostatic Discharge

Guidelines to prevent damage from electrostatic discharge during handling.

North American Hazardous Location Approval

Explosion Hazard Precautions

Safety measures for operating in hazardous locations under North American standards.

European Hazardous Location Approval

European Hazardous Location Precautions

Safety warnings for European hazardous environment use, including UV and enclosure requirements.

About the Module

Install the Module

Installation Safety Precautions

Safety considerations for installing the module, including grounding and electrical arcs.

Remove the Module

Replace the Module

Steps for safely removing and installing replacement modules.

Wire the Module

Wiring Safety Precautions

Warnings and cautions for wiring, including arc prevention and conductor limits.

DC Wiring Configuration

Details for wiring the module with 12/24V DC power sources.

AC Wiring Configuration

Details for wiring the module with 120/240V AC power sources.

General Specifications

Environmental Specifications

Certifications