EasyManua.ls Logo

Rockwell Automation Allen-Bradley 1756-HIST1G - Page 25

Rockwell Automation Allen-Bradley 1756-HIST1G
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FactoryTalk Historian Machine Edition Module 25
Publication
1756-IN611A-EN-P - February 2010
Allen-Bradley and ControlLogix are trademarks of Rockwell Automation.
Ethernet is a trademark of Digital Equipment Corporation, Intel, and Xerox Corporation.
All supply voltages
and/or current
ratings.
5.1 V DC @ 800 mA
24 V DC @ 3 mA
Isolation Voltage 30V (continuous), Basic Insulation Type. Type tested at
500V AC for 60 s, Ethernet to System
Wire Size Ethernet connections:
RJ45 connector according to IEC 60603-7, 2 or 4 pair
Category 5e minimum cable according to TIA 568-B.1 or
Category 5 cable according to ISO/IEC 24702
Wiring Category
1
2 - on communications ports
North American
Temp Code
T4
Certifications
2
(when product is marked)
c-UL-us: UL Listed Industrial Control Equipment, certified
for US and Canada
c-UL-us: UL Listed for Class I, Division 2 Group A,B,C,D
Hazardous Locations, certified for U.S. and Canada
CE: European Union 2004/108/EC EMC Directive,
compliant with:
EN 61326-1; Meas./Control/Lab, Industrial
Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8,
Zone A & B)
C-Tick: Australian Radiocommunications Act, compliant
with:
AS/NZS CISPR 11; Industrial Emissions
1
Use this Conductor Category information for planning conductor routing. Refer to
publication 1770-4.1, “Industrial Automation Wiring and Grounding Guidelines”.
2
See the Product Certification link at www.ab.com for Declarations of Conformity,
Certificates, and other certification details.
Cat. No. 1756-HIST1G | 1756-HIST2G

Related product manuals