Rockwell Automation Allen-Bradley FactoryTalk Analytics LogixAI - User Manual

Quick Start
FactoryTalk Analytics LogixAI
FactoryTalk® Analytics™ LogixAI® (catalog number 1756-CMS1B4) uses predictive analytics to turn raw data about how a system operates into
actual decisions about the operation and maintenance of that system.
Summary of Changes
This publication has been revised for the following:
• Updated the images for changes to the front of the appliance on page 1
and page 2.
• Updated web browser information on page 3
.
• Updated screen captures, and associated tasks where appropriate, beginning on page 4
.
• Changes to the table on page 4
.
What’s in the Box
To install the appliance, you need:
• 1756 ControlLogix® controller installed in a chassis
•RJ45 Ethernet cable
Item Description
1 Reset Button
2 Display Port
3 USB 3.0 Port
4ETH1 Ethernet port
1
4
2
3
COM MDL STS OK

Rockwell Automation Allen-Bradley FactoryTalk Analytics LogixAI Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley FactoryTalk Analytics LogixAI
Category	Control Unit
Language	English

Summary

Summary of Changes

Whats in the Box

Set Up the Appliance

Remove Battery Paper Tab

Remove protective tab from battery before installation.

Install Appliance in Chassis

Mount the appliance into a ControlLogix chassis slot.

Connect Appliance to Computer

Connect appliance to PC via USB dongle and Ethernet.

Configure Appliance Network

Set Up Computer IP Address

Adjust PC IP address and subnet mask to match appliance.

Initial Appliance Configuration

Access Web Configuration Interface

Open browser and navigate to appliance IP address.

Configure Appliance Settings

Set hostname, date/time, and security credentials.

Accept End-User License Agreements

Review and accept license terms.

Create Prediction Model

Define Prediction Parameters

Specify model name, controller, process type, and prediction type.

Train the Model

Save model as L5X, import UDT, and set TRAIN tag.

Start Analytic Calculations

Set CALCULATE tag to 1 after training to begin analysis.