Rockwell Automation PanelView Plus 700 User Manual

Publication 2711P-UM001I-EN-P - December 2008 197
Upgrade Firmware Chapter 8
3. From the Firmware source folder list, select the location of the
firmware files.
The default location is C:\Program Files\Rockwell
Software\RSView Enterprise\FUPs.
4. From the Upgrade firmware version list, select the version of the
firmware you want to upgrade to, then press Next.
5. Select the appropriate KEPServer drivers and press Next.
If no KEPServer drivers are needed, just press Next.
TIP
If the selected FUP file does not support the KEPServer
drivers, this dialog will not appear.

Rockwell Automation PanelView Plus 700 Specifications

General

Brand	Rockwell Automation
Model	PanelView Plus 700
Category	Touch terminals
Language	English