204 Publication 2711P-UM001I-EN-P - December 2008
Chapter 8 Upgrade Firmware
11. Click Finish to start the upgrade.
12. Click Yes to continue the upgrade process.
If the terminal was properly prepared for the upgrade, no
applications should be running.
Firmware files are downloaded to the terminal. This may take
several minutes to 15 minutes.
13. When the download is complete, click OK to reset the terminal.
If other terminals exist on the same Ethernet network, the
following error may display:
Error registering name on network (may be duplicate). Change
in system Control Panel and try again.
To Next Page
Loading...
