Need help?Do you have a question about the Rockwell ShopSeries RK 713 6.1 and is the answer not in the manual?
Lists all components of the miter saw with their corresponding numbers.
Lists recommended accessories and advice for purchasing them.
Lists detailed technical specifications of the miter saw.
Guides through the step-by-step assembly process of the miter saw.
Instructs to identify and check parts before beginning assembly.
Provides instructions for assembling the stand legs.
Details the process of fitting the assembled legs to the saw.
Explains how to attach the 2x4 support lumber to the stand.
Guides on attaching and positioning the roller supports.
Instructions on how to properly lock the miter handle.
Details how to install and use the dust bag for dust collection.
Explains the function and use of the work-piece clamp.
Describes how to release the saw head from its locked position.
Introduces the section detailing the saw's features and controls.
Explains how to use the miter lock handle to secure the saw.
Describes the spindle lock button for blade changes.
Explains how to operate the saw using the trigger switch.
Details the miter scale and positive stops for accurate angle settings.
Provides instructions for mounting the saw to a workbench.
Guides on how to align the saw blade perpendicular to the miter table.
Mentions the pre-cut throat plate slot for blade clearance.
Notes that pivot adjustments are factory set and usually not required.
Provides a step-by-step guide on how to replace the saw blade.
Emphasizes reading all instructions before operation for safety.
General safety instructions related to potential injury risks.
Covers general safety guidelines applicable to the tool.
Details the importance and procedure for proper grounding of the tool.
Outlines safety considerations specific to double-insulated tools.
Lists general safety precautions applicable to all tools.
Explains the meaning of various symbols used in the manual.
Presents critical safety warnings specifically for all types of saws.
Offers specific safety instructions for operating the miter saw.
Introduces the section on how to perform cuts with the miter saw.
Explains how to make a straight or mitered crosscut on wood.
Detailed instructions for performing a crosscut operation.
Guides on how to perform a bevel cut using the miter saw.
Detailed instructions for setting up and executing a bevel cut.
Explains how to perform cuts that involve both miter and bevel angles.
Step-by-step guide for making a compound miter cut.
Advises on the necessity and method of supporting long workpieces.
Explains how to use the saw with its stand and roller supports.
Details how to use flip stops for repeatable cuts.
Provides helpful tips for using the compound miter saw.
Advises on the correct positioning of warped material for cutting.
Stresses the importance of clamping wide workpieces.
Offers guidance on tool maintenance for optimal performance and safety.
Lists common problems, their probable causes, and suggested remedies for the miter saw.
Outlines product warranty terms and the 30-day exchange policy.
Spanish list of all parts for the miter saw.
French list of all components for the miter saw.
To Next Page
General