Rockwell 34-618 - User Manual

Overview of the circular saw manual and its importance.

Essential safety guidelines for operating power tools.

Specific safety precautions for circular saw operation.

Instructions for assembling the saw stand.

Steps to mount the saw onto the assembled stand.

Alternative methods for securing the saw.

Guidance on selecting the appropriate motor.

Steps to install the motor mounting hardware.

Instructions for motor, pulley, and belt setup.

How to install the power switch on the saw.

Guidelines for connecting the saw to the power source.

Essential steps for safe electrical grounding.

Understanding and resetting the motor overload relay.

Instructions for installing the belt and pulley guard.

How to attach table extension wings and guide rails.

Steps for installing the blade guard and splitter.

Installing and adjusting the table insert.

How to use and align the rip fence.

Using and adjusting the miter gage for cuts.

Adjusting saw blade height and tilt.

Setting the blade's 90-degree tilt lock.

Procedure for safely removing the saw blade.

General safety and practices for saw operation.

Guide to performing cross cuts using the miter gage.

Instructions for making lengthwise rip cuts.

How to use the moulding cutterhead attachment.

Instructions for using the dado head attachment.

List and types of available saw blades.

Various moulding cutterhead set options.

Different types of cutterhead knives.

Available dado head set configurations.

Information on the tenoning attachment.

Details on the miter gauge accessory.

Description of the miter gauge clamp attachment.

Protective covers for belts and pulleys.

Accessory for locking the power switch.

Information on the optional steel stand.

Accessory for mobility with casters.

Replacement for the standard table insert.

Special insert for moulding operations.

Special insert for dado head operations.

List of Rockwell service center locations.