Need help?Do you have a question about the Rockwell ShopSeries RK7240.1 and is the answer not in the manual?
Lists recommended accessories for the table saw and guidance on selection.
Details grounding requirements for safe operation of electrical tools.
Specific guidelines for tools with double insulation, including parts and plugs.
Provides detailed safety advice to prevent kickback and potential injuries.
Safety guidelines for using extension cords with the table saw.
Defines key terms used in the manual, such as through-sawing, push stick, freehand, and kickback.
Explains the function and importance of the blade guard and splitter.
Details the proper use and specifications of push sticks for safety.
Guides the user through the assembly process of the table saw and its components.
Instructions on operating the power switch and using the safety key.
How to use the handle to adjust the blade height.
Explains how to tilt the blade for bevel cuts using the wheel and stop collar.
Describes the function of the splitter in preventing binding and kickback.
Guidance on using the rip fence for ripping operations.
Instructions for using the miter gauge for cross and miter cuts.
Details the use of the push stick for safe feeding of workpieces.
Step-by-step instructions for safely replacing the saw blade.
How to perform 90° cuts across the grain using the miter gauge.
How to perform angled cuts across the grain using the miter gauge.
How to perform crosscuts with the blade tilted at an angle.
How to perform cuts with both the miter gauge and blade tilted.
How to perform cuts along the grain using the rip fence.
How to perform ripping cuts with the blade tilted at an angle.
To Next Page
General