Need help?Do you have a question about the roco Z21 switch DECODER and is the answer not in the manual?
General| Type | Switch Decoder |
|---|---|
| Manufacturer | Roco |
| Product number | 10836 |
| Number of Outputs | 4 |
| Output Current | 1A per output |
| Supported Protocols | DCC |
| Weight | 50g |
| DCC address range | 1 to 2048 |
| Power Supply | 12-18V AC/DC |
| Control Method | DCC |
| Programming Mode | POM |
Crucial warnings for correct connection and operation to prevent damage or malfunction.
Details various output operating modes: pulse, instantaneous, bi-stable, and alternate flash.
Instructions for connecting the power supply and DCC signal inputs.
Recommends RCN-213 addressing and explains addressing types for external control centres.
Step-by-step guide for configuring the decoder using the programming button.
Details programming addresses for outputs 1 through 8.
Guide to selecting between "ROCO" and "RCN-213" addressing modes.
Using Programming on Main (POM) for decoder configuration.
Configuring the decoder using POM commands for accessory functions.
Introduction to the Configuration Variable (CV) list for detailed settings.
To Next Page