If apron is loose, remove one link from each side of that apron chain assembly and readjust to tension as
shown. CAUTION: Over tightening can cause premature failure of the drive components.
SPREADER OPERATION
ALWAYS REFER TO THE OPERATING SAFETY PRECAUTIONS AND SAFETY DECAL
SECTIONS OF THIS MANUAL BEFORE OPERATING THIS SPREADER
LOADING
• BEFORE LOADING THE SPREADER, be sure there are no obstructions in the beaters or discharge
opening. Inspect the spreader to see that it is in good mechanical condition and that all shields are in
place and functional.
• NEVER CHECK THE SPREADER WHILE IT IS OPERATING
• IN FREEZING WEATHER, make sure the apron is not frozen with manure. If this appears likely,
turn off vehicle engine, remove ignition keys, loosen the frozen area and operate before loading.
• AVOID LOADING ROCKS AND OTHER SOLID OBJECTS INTO THE SPREADER
• NEVER COVER BEATERS when loading, beaters should spin freely before engaging.
14
To Next Page
Loading...