Need help?Do you have a question about the RODE Microphones NT4 and is the answer not in the manual?
Lists key features of the NT4 stereo condenser microphone, including capsule type and power operation.
Explains how to power the NT4 microphone using phantom power or a 9V battery.
Details various scenarios where the NT4 microphone can be effectively used for stereo recording.
Lists key features of the NT4 stereo condenser microphone, including capsule type and power operation.
Explains how to power the NT4 microphone using phantom power or a 9V battery.
Details various scenarios where the NT4 microphone can be effectively used for stereo recording.
General| Acoustic Principle | Pressure Gradient |
|---|---|
| Active Electronics | Yes |
| Frequency Response | 20Hz - 20kHz |
| Output Impedance | 200 ohms |
| Max SPL | 137dB SPL |
| Output Connection | XLR |
| Connector | XLR |
| Type | Condenser |
| Sensitivity | -38 dB (0 dB = 1 V/Pa) |
| Power Requirements | 48V phantom |
| Polar Pattern | Stereo X/Y |
| Equivalent Noise | 18dB A-weighted |
| Self Noise | 18 dBA |
| Dimensions | 230mmH x 39mmW x 39mmD |
To Next Page
