20
The voice selections made using this procedure can be saved in General and Divisional combination
pistons. All stop tabs return to their default voices as labeled when the organ is turned off.
In order to save Voice Palette selections in combination pistons, the Voice Palette must first be
unlocked. This locking feature only prevents “blind” changes to Voice Palette selections; manual changes
are always possible.
Unlocking the Voice Palette
1. Press and hold the SET piston.
2. Turn the Select Knob counter clockwise (left). The Console Display reads:
V O I C E P A L E T T E
L O C K E D
3. Rotate the Alpha Dial to unlock the Voice Palette. Voice Palette selections can now be stored
in combination pistons.
When the Voice Palette is locked, combination pistons will not affect Voice Palette selections, even
selections previously saved in combination pistons.
Locking the Voice Palette
1. Press and hold the SET piston.
2. Turn the Select Knob counter clockwise (left). The Console Display reads:
V O I C E P A L E T T E
U N L O C K E D
3. Rotate the Alpha Dial to lock the Voice Palette.
MASTER VOLUME CONTROL
Special situations and individual preferences sometimes require a temporary change in the overall
volume of the organ. This is easily accomplished.
Adjusting the Master Volume
1. Press and hold the SET piston.
2. Turn the Select Knob to “MASTER VOLUME”.
3. Rotate the Alpha Dial to obtain the desired volume level. Note: An Audio Save may be
performed to save this setting as the default. Please refer to the “Audio Save” section.
To Next Page
Loading...
