5
The blinking square in the Console Display, called the cursor, indicates the setting which is currently
selected. Rotating the Alpha Dial will change the value of any selected setting.
There are three different menus. The User Menu accesses organ and audio settings such as Voice
Palette, Tremulant settings, Master Volume, and Auxiliary Input controls. This menu is accessed by
holding SET and turning the Select Knob counter clockwise (left) from the Transposer menu.
The second menu controls MIDI settings and is accessed by holding SET and turning the Select Knob
clockwise (right) from the Transposer menu.
The third menu also accesses organ and audio settings, but it is only available when headphones are
used. Note: Please refer to the “Stereo Headphone Jack” section.
To return to the Transposer display, press General Cancel.
To Next Page
Loading...
