EVISION - HD101 & HD102 www.roevisual.com
V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved.
36 / 41
8 Troubleshooting
8.1 No sender detected while using Ethernet cable for control
8.1.1 Cables are not correctly connected.
Check the Ethernet cable for control and connect it again,
8.1.2 IP setup unsuccessful
Please refer to page 39, 9.3 IP Setup
to complete IP settings.
8.2 LED screens didn’t show the changes made on EVISION.
Please use Preview or Save Setting buttons to push changes up to the LED screens.
To Next Page
Loading...