EasyManuals Logo
Home>Roger Technology>Gate Opener>B70/2ML

Roger Technology B70/2ML Instruction And Warnings For The Installer

Roger Technology B70/2ML
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
EN
65
12 Parameters menu
PARAMETER
PARAMETER
VALUE
$ 
Selecting automation system model
WARNING! If this parameter is not set correctly, the automation system may not function properly.
N.B.: in the event of a reset to restore the default parameters, this parameter must be set again manually.

AYRON SERIES - IRREVERSIBLE HIGH-SPEED gear motor with articulated arm

BE20/200 - IRREVERSIBLE arm piston with worm screw
MONOS4 - IRREVERSIBLE telescopic arm piston
$
Automatic closure after pause time (from gate completely open)

Disabled.

From 1 to 15 of gate closure attempts after photocell is triggered.
Once the number of attempts set is reached, the gate remains open.

8LIKEXIXVMIWXSGPSWIMRHIƼRMXIP]
$
Automatic gate closing after mains power outage

Disabled. The gate does not close automatically when mains power is restored.

Enabled. If the gate is NOT completely open, when mains power is restored, the gate closes after a 5 second warning
WMKREPPIH[MXLXLIƽEWLMRKPMKLXMRHITIRHIRXP]SJXLIZEPYIWIX[MXLXLITEVEQIXIV$).
The gate closes in “position recovery” mode (see chapter 17).
$ 
Selecting step mode control function (PP)

3TIRWXSTGPSWIWXSTSTIRWXSTGPSWI

'SRHSQMRMYQJYRGXMSRXLIKEXISTIRWERHGPSWIWEJXIVXLIWIXEYXSQEXMGGPSWMRKXMQI
The automatic closing timer restarts if a new step mode command is received.
Step mode commands are ignored while the gate is opening. This allows the gate to open completely and prevents the
gate from closing when not required.
If automatic closing is disabled (
$
), the condominium function automatically attempts a closing manoeuvre
$
.

'SRHSQMRMYQJYRGXMSRXLIKEXISTIRWERHGPSWIWEJXIVXLIWIXEYXSQEXMGGPSWMRKXMQI
The automatic closing timer does NOT restart if a new step mode command is received.
Step mode commands are ignored while the gate is opening. This allows the gate to open completely and prevents the
gate from closing when not required.
If automatic closing is disabled (
$
), the condominium function automatically attempts a closing manoeuvre
$
.

3TIRGPSWISTIRGPSWI

3TIRGPSWIWXSTSTIR
D
4VIƽEWLMRK

(MWEFPIH8LIƽEWLMRKPMKLXMWEGXMZEXIHHYVMRKSTIRMRKERHGPSWMRKQERSIYZVIW

Flashing warning signal for 1 to 10 seconds prior to every manoeuvre.

WIGSRHƽEWLMRK[EVRMRKWMKREPTVMSVXSGPSWMRKQERSIYZVI
D
Condominium function for partial open command (PED)

(MWEFPIH8LIKEXISTIRWTEVXMEPP]MRWXITQSHISTIRWXSTGPSWIWXSTSTIR

Enabled. Partial commands are ignored during gate opening.
D 
Enabling operator present function

Disabled.

Enabled. The open (AP) or close (CH) button must be pressed continuously to operate the gate. The gate stops when
the button is released.

Other manuals for Roger Technology B70/2ML

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roger Technology B70/2ML and is the answer not in the manual?

Roger Technology B70/2ML Specifications

General IconGeneral
BrandRoger Technology
ModelB70/2ML
CategoryGate Opener
LanguageEnglish

Related product manuals