Roger Technology H70 Series - Instructions and Warnings Introduction; Safety Warnings and Precautions; Product Description H70;EL Module; H70;EL Technical Specifications

3
1 Introducon to the instrucons and warnings
This manual is intended only to qualied technician
for installaon.
Any informaon contained in this document may
be considered of interest to the end user.
This manual refers to the supply module for 12Vac
electric lock model H70/EL and must not be used
for dierent products.
RISK OF
ELECTRIC SHOCK
Read the instrucons carefully before performing
the installaon.
To avoid the risk of electric shock and personal
injury, before working with the device, disconnect
the power supply.
Installaon should only be performed by qualied
personnel in accordance with current laws.
Make the connecons with appropriate cables with
the current and voltage required and respect the
features of the product.
WARNING
2 Product descripon
The power supply module of electric lock H70/EL
is designed for just working with the control unit
H70/200AC.
The module allows to power an electric lock of 12Vac
of maximum power 16VA. Besides it also allows to
easily connect a ashlight of 230Vac (R92/LR1 and
R92/LR2) and to protect it by a fuse. The funconal
scheme is represented in gure 3.
EN
3 Technical features of the product H70/EL
POWER SUPPLY 230Vac 50Hz
CURRENT ABSORPTION 350mA max
ELECTRIC LOCK TENSION 12Vac
MAX. POWER ELECTRIC LOCK 16VA
FLASHLIGHT TENSION 230Vac 50Hz
MAX. POWER FLASHLIGHT 40W
WORKING TEMPERATURE -20°C ÷ +60°C
PROTECTION GRADE IP 00
PRODUCT SIZE dimension in mm. 63 x 101 x 40 WEIGHT: 465 g
4 Installaon
Fix the module through the screws inside the box of
the control unit H70/200AC in the posion indicated
in the gure 2.
Make the connecons with the central unit, to
the electric lock and eventually to the ashlight
following the scheme as represented in gure 1.
The fuse F1 (1A delayed) protects the transformer
and the ashlight, while the fuse F2 (2A delayed)
protects the electric lock.
5 Disposal
The product must be always uninstall by the technical
and qualied sta, using appropriate processes for the
correct removal of the product.
This product is made of dierent materials, some
of them could be recycled others must be disposed
through recycling or disposal systems established by
local regulaons for this product.
It is forbidden to dispose the product into the house
garbage. Make the “separate collecon” for disposal
according to the methods established by local
regulaons; otherwise return the product to the seller
when you buy the new equivalent product.
Local regulaons may provide for heavy penales for
illegal disposal of this product.
Cauon: some parts of the product may
contain pollutants and hazardous, if
thrown they may cause dangerous eects
to the environment and to the human
health.