Roger Technology R30/804 User Manual

ISTRUZIONI E AVVERTENZE PER L’INSTALLATORE
INSTRUCTIONS AND RECOMMENDATIONS FOR THE INSTALLER
ANWEISUNGEN UND HINWEISE FÜR DEN INSTALLATEUR
INSTRUCTIONS ET AVERTISSEMENTS POUR L’INSTALLATEUR
INSTRUCCIONES Y ADVERTENCIAS PARA EL INSTALADOR
INSTRUÇÕES E AVISOS PARA O INSTALADOR
Serie R30
Automazione per cancelli scorrevoli




Automações para portões deslizantes
Istruzioni originali
IS2 Rev.05 04/07/2018

Roger Technology R30/804 Specifications

General

Brand	Roger Technology
Model	R30/804
Category	Gate Opener
Language	English

Summary

Instructions and Recommendations for the Installer

General Safety Precautions

Declaration of Conformity

Manufacturer's statement of compliance with relevant directives and standards.

System Installation Overview

Dimensions

Provides physical dimensions for the R30 system components.

Models and Specifications

Technical Data

Foundation Plate Installation

Preliminary Checks Before Installation

Ensures gate structure is sound and rails are properly installed before mounting.

Installing the Foundation Plate

Guides the proper placement and anchoring of the foundation plate.

Drive Unit Installation

Mounting the R30 Gearmotor

Steps for positioning and securing the gearmotor onto the foundation plate.

Rack Installation

Rack Compatibility and Fixing

Details on using module 4 racks and securing them to the pinion.

Limit Switch Installation

Setting Limit Switches

Instructions for positioning and adjusting limit switch brackets for gate operation.

Electrical Connections

Wiring Without Electronics

Specific wiring diagram for R30 installations without electronic control units.

Mechanical Limit Switches

Magnetic Limit Switches

Contact Information and Support