Roger Technology BH30/806 - User Manual

ISTRUZIONI E AVVERTENZE PER L’INSTALLATORE
INSTRUCTIONS AND RECOMMENDATIONS FOR THE INSTALLER
ANWEISUNGEN UND HINWEISE FÜR DEN INSTALLATEUR
INSTRUCTIONS ET AVERTISSEMENTS POUR L’INSTALLATEUR
INSTRUCCIONES Y ADVERTENCIAS PARA EL INSTALADOR
INSTRUÇÕES E AVISOS PARA O INSTALADOR
Serie BH30
Automazione per cancelli scorrevoli
Sliding gates automations
Automatisierung für Schiebetore
Automatisme pour portails coulissants
Automatismos para cancelas correderas
Automações para portões deslizantes
Istruzioni originali
IS118 Rev.08 09/04/2020

Roger Technology BH30/806 Specifications

General

Maximum thrust	3000N
Operating temperature	-20°C to +55°C
Motor Type	Brushless
Operating Voltage	230 V AC
Maximum Gate Weight	800kg
Control System	Digital
Safety Features	Obstacle detection

Summary

1 General safety precautions

2 Symbols

3 Product description

4 Technical Data

4.1 Product label (example)

Example of the product label showing key identification and compliance details.

5 Typical installation

7 Preliminary checks and installation of the foundation plate

PRELIMINARY CHECKS BEFORE INSTALLATION

Crucial pre-installation checks for the gate and its environment.

INSTALLING FOUNDATION PLATE

Detailed steps for correctly installing the foundation plate.

8 Installation drive unit

9 Fixing The Rack

10 Fastening the micro-switch mechanical limit switch or magnetic limit switch

11 Electrical connections

12 Magnetic limit switches connections

13 Start-up

14 Ordinary maintenance schedule

15 Additional information and contact details

DECLARATION OF INCORPORATION