Operation
R&S
®
DDF205
45Getting Started 4073.0187.02 ─ 03
Refer to the operating manual for a detailed explanation.
2.4.8
Correction Data (R&S DDF205-COR)
Correction data is used to compensate for certain factors which have their origins
outside the R&S DDF205
and affect the measurement results. The correction data
is stored within the flash file system of the R&S DDF205.
The R&S DDF205-COR can process the correction data for correcting Antenna
factors, cable attenuation, azimuth correction and omniphase correction.
Refer to the operating manual for a detailed explanation.
Options for the R&S DDF205
To Next Page
Loading...