Preparation for Use
R&S
®
DDF205
7Getting Started 4073.0187.02 ─ 03
Risk of injury
The
feet may fold in if they are not folded out completely or if the R&S DDF205
is shifted. The feet may break if they are overloaded. Fold the feet completely
in or completely out to ensure stability of the R&S DDF205 and personal
safety. To avoid injuries, never shift the R&S DDF205 when its feet are folded
out. The overall load (the R&S DDF205's own weight plus that of any devices
stacked on top of it) on the folded-out feet must not exceed 500 N. Place the
R&S DDF205 on a stable surface. Secure any devices stacked on top of it
against slipping (e.g. by locking their feet on the top front frame). When the
R&S DDF205 is standing on its folded-out feet, do not work under it and do
not put anything under it as this would pose a risk of personal injury or material
damage.
The R&S DDF205 can be used in any of the positions shown here.
Setup
To Next Page
Loading...