R&S FSH Digital Modulation Analyzer
Measurements on 3GPP FDD Signals
Operating Manual 1173.6275.12 - 30 265
9.4.2 The Code Domain Analyzer
If you equip the R&S FSH with option R&S FSH-K44E, code domain analysis becomes
available to visualize the results in a diagram.
► Press the "Result Display" softkey.
► Select the "Code Domain Power" menu item.
The R&S FSH starts the code domain analyzer.
Screen layout of the code domain power result display
1 Current type of result display
2 Currently selected standard
3 Header table
4 Diagram header
5 Diagram area
6 WCDMA softkey menu
9.4.2.1 Header Table
The header table contains an assortment of settings already discussed in the section
about the result summary. For more information see "The Result Summary" on page
261. In addition, it contains the following information.
RBW
Shows the currently selected resolution bandwidth.
For more information see "Setting the Resolution Bandwidth" on page 102.
Trace mode
Shows the currently selected trace mode.
Clear/Write and Max Hold are available for 3GPP measurements.
For more information see "Selecting the Trace Mode" on page 111.
To Next Page
Loading...
