Rohde & Schwarz FSH13 - Functions of the Distance-To-Fault Mode; Frequency Parameters; Measurement Configuration

R&S FSH Menu and Softkey Overview
Functions of the Distance-to-Fault Mode
Operating Manual 1173.6275.12 - 30 342
10.5 Functions of the Distance-to-Fault Mode
This section contains all softkeys and menus that are available in distance-to-fault
mode.
Distance-to-fault functionality is available with option R&S FSH-K41.
10.5.1 Measurement Configuration
The MEAS key opens the measurement menu that contains functionality to select and
configure the measurement.
10.5.2 Frequency Parameters
The FREQ key opens the frequency menu that contains functionality to set up the
horizontal axis of the measurement diagram.