Rohde & Schwarz FSH13 - Preparing the Measurement; Creating a Measurement Set

R&S FSH Operating the R&S FSH
Connecting the R&S FSH to a PC
Operating Manual 1173.6275.12 - 30 26
► Press the "Add" button to create a new network connection.
► Specify a name for the new network connection, for example R&S FSH.
► Enter the IP address for the R&S FSH (in this case 192.0.2.10)
► Confirm the entry with the "OK" button.
The connection is now created and configured and is added to the IP Configuration
list.
► Select the new connection labeled R&S FSH.
► Press the Connect button to establish the connection.