Basic Operations
R&S
®
FSVA/FSV
87Quick Start Guide 1321.3066.02 ─ 06
Figure 6-4: Focused area
Figure 6-5: Focused area in edit mode
Edit mode
When using the touchscreen for focus changes, all focused areas are in the
edit mode automatically, if available. Otherwise, you must switch to edit
mode manually.
Switching to edit mode
1. Press the ENTER key.
2. To quit the edit mode, press the ESC key.
Working in dialog boxes
●
To edit alphanumeric parameters, use the keypad or the on-screen keyboard.
For details see Chapter 6.3.1, "Entering Numeric Parameters", on page 83
Setting Parameters
To Next Page
Loading...
